Found the Sway Bar End Links to be completely worn out and the Lower Ball Joints to also be worn.
Remove and reinstall four wheels and rear brake drums(if equipped) to inspect brake condition. Inspect entire system for deterioration and leaks. Found the Brake Master cylinder and Booster to be faulty causing loss of hydraulic pressure. Also found the rear calipers sticking causing the rear pads and rotors to overheat. Replace Master Cylinder and Booster and also replace rear Calipers, Pads, and Rotors.
Billy F. gave our service a 5 star review on 7/24/2023
Remove and reinstall four wheels and rear brake drums(if equipped) to inspect brake condition. Inspect entire system for deterioration and leaks.Found rear brakes metal on metal, replace rear calipers, pads and rotors.
Shakeshia B. gave our service a 5 star review on 10/5/2022
Computer engine analysis procedure with scanner–Access data link connector and analyze all vehicle PCM data—Found engine to be misfiring and oil pressure drops to below 25 when at hot idle. Oil is clean and full at this time. Performed Block-test to verify head gasket condition. Engine passed Block-test. Accessed engine data and found Cam Timing not responding correctly. Cam Phasers and Timing chain will need to be replaced. Most likely though coupled with low oil pressure at idle this could be an indication of excessive internal engine wear and engine may need to be replaced.
Eddie B. gave our service a 5 star review on 7/18/2022